2 Channel Full Range Digital Amplifier. 200W x 2CH @ 1Ω / 125W x 2CH @ 2Ω / 80W x 2CH @ 4Ω RMS Power Output. 400W x 1CH @ 2Ω / 250W x 1CH @ 2Ω RMS Bridged Power Output. Input Sensitivity: 0.2-10 Volt. Selectable X-Over: LPF / FULL / HPF. Crossover Filter : 50-500Hz, 12dB Per Octave Slope.
Notify me when this product is in stock:
2 Channel Full Range Digital Amplifier. 200W x 2CH @ 1Ω / 125W x 2CH @ 2Ω / 80W x 2CH @ 4Ω RMS Power Output. 400W x 1CH @ 2Ω / 250W x 1CH @ 2Ω RMS Bridged Power Output. Input Sensitivity: 0.2-10 Volt. Selectable X-Over: LPF / FULL / HPF. Crossover Filter : 50-500Hz, 12dB Per Octave Slope. Frequency Response: 10-33KHz. Signal to Noise Ratio: > 90dB. Overall Operation Efficiency: >84%. Selectable REM / VOX / DC Turn On Modes. Bass Boost: 0 - 18dB.
| Amplifier | 2 Channel |
|---|---|
| RMS Power (1Ω) | 200W x 2CH |
| RMS Power(2Ω) | 125W x 2CH |
| RMS Power (4Ω) | 80W x 2CH |
| Topology | Full Range Class-D |
| Frequency Response | 10-33KHz |
| Power Supply | 12-14.4V |
| Power Supply (Threshold) | 8.4V-16.5V |
| Idle Current | 0.5A |
| Distortion - THD (1KHz@4Ω) | <0.3% |
| Distortion - S/N Ratio (A weight @ 1W) | >90dB |
| Distortion - S/N Ratio (A weight @ FP) | -88dBa |
| Input Sensitivity High | 0.3V- 8.5V |
| Input Impedance - Low Input Level | 22KΩ |
| Input Impedance - High Input Level | N/A |
| Output Impedance | 1Ω |
| Damping Factor (50Hz@4Ω) | >100 |
| Bandwidth (-3dB) | 20-30kHz |
| Crossover (-12 dB/ Oct) Variable High-Pass | 50Hz-500Hz |
| Crossover (-12 dB/ Oct) Variable Low-Pass | 50Hz-500Hz |
| FUSE Ratings - ATC | 30Ax2 |
| Dimension - Length x Width x Height - Inches(mm) | 9” x 6.3” x 1.9” (229.5 x 160 x 48.3 mm) |
