1 Channel MonoBlock Digital Amplifier. 1000W x 1CH @ 1Ω / 700W x 1CH @ 2Ω / 450W x 1CH @ 4Ω RMS Power Output. Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope. Signal to Noise Ratio: > 90dB. Overall Operation Efficiency: >85%. Selectable REM / VOX / DC Turn On Modes. Variable Phase Adjustment. Remote Bass Knob Included.
Notify me when this product is in stock:
1 Channel MonoBlock Digital Amplifier. 1000W x 1CH @ 1Ω / 700W x 1CH @ 2Ω / 450W x 1CH @ 4Ω RMS Power Output. Input Sensitivity: 0.2-10 Volt. Crossover Filter : 50-250Hz (LPF), 24dB Per Octave Slope. Frequency Response: 20-500Hz. Signal to Noise Ratio: > 90dB. Overall Operation Efficiency: >85%. Selectable REM / VOX / DC Turn On Modes. Variable Phase Adjustment. Remote Bass Knob Included.
| Amplifier | 1 Channel |
|---|---|
| RMS Power (1Ω) | 1000W |
| RMS Power(2Ω) | 700W |
| RMS Power (4Ω) | 450W |
| RMS Bridge (mono 4Ω) | N/A |
| Topology | Monoblock |
| Frequency Response | 20-500Hz |
| Power Supply | 12-14.4V |
| Power Supply (Threshold) | 8.4V-16.5V |
| Idle Current | 1.1A |
| Distortion - THD (1KHz@4Ω) | <0.3% |
| Distortion - S/N Ratio (A weight @ 1W) | >90dB |
| Distortion - S/N Ratio (A weight @ FP) | -88dBA |
| Input Sensitivity High | 0.3- 8.5V |
| Input Impedance - Low Input Level | 22KΩ |
| Input Impedance - High Input Level | N/A |
| Output Impedance | 2Ω |
| Damping Factor (50Hz@4Ω) | >100 |
| Bandwidth (-3dB) | 10Hz-300Hz |
| Crossover (-12 dB/ Oct) Variable Low-Pass | 50-250Hz |
| Crossover (-12 dB/ Oct) Variable Sub-Sonic | 10-55Hz |
| FUSE Ratings - ATC | 30Ax3 |
| Remote | Included |
| Dimension - Length x Width x Height - Inches(mm) | 9” x 6.3” x 1.9” (229.5 x 160 x 48.3 mm) |
